Locations.html

Locations

Manage > Locations

Locations are tablets located at a place where production done, quality control performed or time recorded (such as a time clock). They don't have to be a machine's location, but typically this is how they'd be configured

Id – unique identification number
Name – simple description of the location
Department – drop down menu to define the department to which the location belongs. Departments are defined elsewhere in the manage menu
Category - the category of this location
Printer ID - which printer this location is connected to. only used if printing out labels such as shipping, or customer information
Users – check this to allow users to work from this location. If the station is unmanned, such as a clock-in terminal, then this would likely be unchecked.
Many users – check this for a team workplace in which multiple staff members operate
Production – if a location is used for production, then this box would be checked. A sewing machine, for instance, would produce work but a clock-in terminal would not
Share - check this if multiple operators at one location share earnings for the work done there.
Door Signout - a tablet can be set up at an exit door to allow users to scan as they leave work. Scanning at a locatoin configured with the 'door signout' box checked, will sign that user out of any other location that they're logged in to.
QC - check this box to set up this location as an inspection/QC location.
AuditCheck - sets a location as an Audit location - this is for use with AQL (Manage-Quality-Audit)
Force Scan - requires the user to scan a code instead of being able to pick from a list. Increases accuracy
Op Seq - requires the operations to be done in order. Please see the Operation Sequencing section for more information
Zone - this function allows multiple users to work on a single operation as part of a team.
Door Sign - set this if the location is intended to be on the exit door of a facility for recording departing staff members and recording their outgoing time.

Note - To configure a location for clocking in/out only, set the following checkboxes only: users, many users

Toggle navigation

Exenta Shopfloor

[]